| Frame Rating | 100,000 lbs. Evenly distributed load over the length of the trailer. |
| Tare Weight | 14,000 lbs +- 2% |
| Overall Length | 40 ft. |
| Overall Width | 102 inches |
| Kingpin Location | 24 inches |
| Tractor Fifth Wheel Height | 48 inches |
| Landing Gear Location | 104 inches from the kingpin |
| Tandem Center Line | 69 inches from rear to centerline of axle |
| Rear Height | Approximately 54 inches |
| Front lifting bar | Plate with lifting loop |
| Front of Trailer | 8 5/8 inch pipe with recessed glad hands and electrical receptacle |
| Main Beams | Fabricated High Tensile Steel |
| Upper Coupler Assembly | Pick up plate is 5/16” thick and is reinforced fore and aft of the kingpin by 1/4 inch formed channels |
| ICC Bumper | This trailer meets the wheels back condition for exception of the DOT bumper rule |
| Cross Member | 6" structural I beam on 12" centers |
| Side Rail | 8" channel x 8.5 lbs/ft |
| Rear of Trailer | A 8 5/8" roller at rear 1 " above the deck level. Heavy duty pipe bumper is recessed 4" forward of roller with additional gusseting to frame for superior strength. |
| Floor | 1 1/8 inch thick Apitong or Angelin Pedra, 2 screws per board. |
| Landing Gear | Fabricated swing down type with drop down legs for additional height adjustment. Winch style crank. Top of legs to be capped. |
| Landing Gear Axle Type | Fixed |
| Landing Gear Foot Group | Welded on heavy duty steel plate |
| Crank Handle Location | Road side handle |
| Axle Quantity | Two Axles |
| Suspension Type | Single Point |
| Axle Centers | 57 inch |
| Springs | Three Leaf |
| Hub Type | Hub piloted for disc wheels |
| Hub Material | Steel |
| Drum | Outboard mounted |
| Rims/Wheel | 8 1/4 X 24.5 hub piloted tubeless |
| Wheel/Rim Color | White |
| Tires | Evans Supplied |
| Tire Size | 11R 24.5 |
| Tire Inflation System | None |
| Brake Lining Options | Standard |
| Lubrication | Oil 90 wt. |
| Brake System Type | 2S1M |
| Hubodometer | None |
| Electrical System | 12 volt, 7-way split pin receptacle plug; modular wiring harness |
| Light Attachment | Grommet mounted |
| Light Type | Incandescent |
| Metal Preparation | Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial Blast Cleaning” |
| Primer | 70% Zinc |
| Topcoat | Urethane |
| Color | Black |
| Markings | FHWA plate |
| Customer Decals | Furnished by Customer |
| Conspicuity | Meets DOT requirements |
| Registration Holder | Plastic with clear screw on top |
| Mud Flaps | Plastic anti sail |
| Front Weevil Pockets | None |
| Side Weevil Pockets | Two recessed each side |
| Rear Weevil Pockets | Two recessed at rear, angled |
| Weevil Pins | 2 |
| Steel & Fasteners | All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50. All structural fasteners are Grade 5 or better and are zinc coated |
| GVWR | 80,000 lb |