| Frame Rating | 80,000 lbs. Evenly distributed load over the length of the trailer. |
| Tare Weight | Approximately 11,850 lbs. |
| Length | 48 ft. 2 inches |
| Front Deck Height | 59 inches |
| Rear Deck Height | 52 1/2 inches |
| Overall Width | 96 inches |
| Kingpin Location | 36 inches |
| Tractor Fifth Wheel Height | 48 inches |
| Landing Gear Location | Minimum 88 inches from King pin |
| Tandem Center Line | 105 inches |
| Main Beams | Fabricated High Tensile Steel |
| Upper Coupler Assembly | Pick up plate is 3/8” thick and is reinforced fore and aft of the kingpin by 1/4 inch formed channels |
| Side Rail | C6 x 6.5 lb per ft |
| ICC Bumper | 4" square tube step bumper, D.O.T. approved under ride guard, No rubber dock bumpers |
| Floor | 10 ga steel, 3 panels at front, 3 panels at rear |
| Landing Gear | Two speed AAR approved, square leg. 50,000 lb. lift capacity and 140,000 static load capacity. |
| Landing Gear Axle Type | Standard |
| Landing Gear Foot Group | 10 in. by 10 in. Low profile sandshoe |
| Crank Handle Location | Road side handle |
| Axle Quantity | Two Axles |
| Suspension | Spring-Ride |
| Axle Centers | 49 inch |
| Hub Type | Hub piloted for disc wheels |
| Hub Material | Steel |
| Drum | Outboard mounted |
| Rims/Wheel | 8 1/4 X 22.5 hub piloted tubeless |
| Wheel/Rim Color | White |
| Tire | Evans supplied |
| Tire Size | 11R 22.5 |
| Brake Lining Options | Standard |
| Lubrication | Oil 90 wt. |
| Slack Adjusters | Automatic |
| Brake System Type | 2S1M |
| Electrical System | 12 volt, 7-way split pin receptacle plug; modular wiring harness |
| Light Attachment | Grommet mounted |
| Light Type | Incandescent |
| Metal Preparation | Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial Blast Cleaning” |
| Primer | 70% Zinc Rich Primer |
| Topcoat | Urethane |
| Color | Black |
| Markings | FHWA plate, Evans logos. |
| Customer Decals | Furnished by Customer |
| Conspicuity | Meets DOT requirements |
| Registration Holder | Plastic with clear screw on top |
| Mud Flaps | Plastic anti sail |
| Cage Seperators | 1/4 inch thick full width creating eleven 52 3/4 inch bays |
| Outer Cage Containment | 2 1/2 inch angles mounted on side rail at each bay |
| Steel & Fasteners | All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50 or better. All structural fasteners are Grade 5 or better and are zinc coated |
| GVWR | 80,000 lbs |